Crane Electro magnetic disc brake 1. The brake and separation of the power shaft with 24V direct current control, electric braking and power failure separation.

Crane Hydraulic brake 1. Control the braking and separation of the power shaft through the oil pressure control, and remove the pressure and boost the separation. 2. It can be used in dry and oil-free occasions, and can also be used in wet oil immersion. 3. With manual...

End beam of crane use rectangular tube manufacturing module, buffer motor drive, match with forged wheels, using numerical control lathe boring and milling of various customed machine, Disposable completes the opening, boring, milling drilling. You just need to joint and...

Crane Driving Beam 1. The end beam is welded and formed of rectangular steel tube or steel plate. After forming, the end beam is positioned at a single position of the CNC machine tool to achieve the allowable deviation range and ensure the accuracy; 2. Each end beam is...

European crane end beam 1. The special rectangular tube is designed in one time, with excellent workmanship, and the surface is treated with shot blasting, and the surface is smooth and beautiful. 2. Buffer start design, start and brake smoothly over, load will not shake,...

Shipyard electric cross transfer cart for railway transport, it makes the AC electricity power is transformed into AC 36v two-phas and are respectively connected to the two rails.Then the cross transfer cart conduct the AC 36v on rail into the electrical...

Because of the limitation of production workshop or factory area in some plant, product handling route is not a conventional linear, there have been some arc, rectangular and s type of straight line, but the transportation route is a single, tonnage is larger, if from the...

Battery Powered Transfer Cart KPX series is battery electric flat car, with battery power supply. The battery provides power to the dc traction motor, and the dc motor drives the flat car to run. Compared with ac motor, dc motor has the advantage of not burning, starting...

Grand Crane wheel are replaced because of flange wear, flange breakage, and mechanical overloads characterized by pitting and spalling. Each of these inservice factors must be carefully considered before the combination of wheel design, material selection, hardness pattern...

Double edge wheel parts are often used with running wheels of trolleys and cranes of bridge crane or gantry crane. Height of wheel flange is 25mm~30mm. It adopts ZG340-640 cast steel or ZG-50SiMn low alloy steel. Quenching depth of wheel tread is no less than 20mm....

he crane coupling is used to connect the two shafts to rotate and transfer torque. Crane cart running mechanism, electromagnetic torque, when the electric motor with brake wheel shaft coupling, transmission shaft, gear coupling torque into the reducer, the gear deceleration...

1. Function of the drum group: the drum group is an important part of lifting machinery equipment. 2. Structure of the drum group: the drum group is mainly composed of the reel, reel shaft, gear plate (or large gear), the drum hub, bearing body and bearing. 3. If the lifting...