Cabin Control Foundry Grade Overhead Casting Cranes

Cabin Control Foundry Grade Overhead Casting Cranes

Brief introduction of QDY series bridge foundry crane:   QDY bridge foundry crane with hook is mainly used at the place where the molten metal is lifted. Which including QDY5-10t-10.5~3.15m,QDY16/3.2-50/10t-10.5~3.15m,QDY74/20t-13.5~3.15m.We can also customize according to your needs.The working class of the complete machine is A7, and thermal-protective coating is added at the bottom of the main girder. The assembling and test of the crane confirm to the document No. ZJBT [2007]375 which was issued by General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. The place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document. (note: HO in the be[ow figure is the increased height of buffer of the crane. H0<250) .   

Cabin Control Foundry Grade Overhead Casting Cranes is a type of bridge crane found in industrial environments, such as lifting the casting ladle in steel mill.

Cabin Control Foundry Grade Overhead Casting Cranes consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge.

In many instances the cost of a bridge crane can be largely offset with savings from not renting mobile cranes in the construction of a facility that uses a lot of heavy process equipment.